1.5 University Metal Bunk Bed for Small Spaces

A great small space bunk bed option is the 1.5 University bunk bed that is also available in multiple sizes.  Designed for those with ceiling height constrictions and sit lower to the ground while offering size options. from 30", 36", and 54" wide in both standard 75" and long 80" length.  The metal bed frame is constructed from a 1.5" powder coated, rust resistant square tube steel and the platforms are welded 1" tubular steel, not springs, allowing for a lifetime of durability.  

The University 1.5 Bunk Beds come complete with both 2 side ladders and rails making them safe for both home and commercial uses. The University bunkbed series are some of the most solid bunk beds you will see with no rocking or shaking, and its full-length side rails are bolted to the frame.  This set includes a ladder that is part of the frame for both front and rear access. 

Mattress space is no issue and is plenty deep to give you any mattress option and be well within safety compliance regulations. The University bunk is rated for 375 lbs. on both the top and bottom bunk and meets or exceeds safety standards. The 1.5 is a Lower bed that is made to sit 10" off the ground with a total height of 64”.  The University bunk set is not debunk-able and must be used as a set making it stronger than most bunk beds. Bunk Beds do not qualify for Free Shipping.

Why choose this bunk bed? 

If you need something with a lower ceiling height or lower deck and want a twin size with the strength of the solid University style along with ladders and full size rails. 

Features & Specs 

• 2 Guard Rails included
• 1.5” square Post
• 1″ square and ½” square cross tube sleeping deck with button hook in style connector
• Rust-resistant , Epoxy powder coated finish
• Built in ladders
• Certified to Meet or exceeds ASTM F 1427-13 ” Standard Consumers Safety Specifications for Bunk Beds”
• Certified to Meets or exceeds Code of Federal Regulations (CFR) 1213 “Safety Standard for Entrapment Hazard in bunk beds” and Code of Federal Regulations (CFR) 1513 “Requirement for Bunk Beds”
• 375 lb weight limit on each sleeping deck
• We do have the ability to provide mattress options with both standard and commercial vinyl covers for institutional use. 

Dimensions (based on 39"x75" )

• Overall width 42-½” with guardrails
• Overall Length 81-½”
• Overall height 64”
• Clearance under deck 8″ Height to top of bottom deck 10.5″
• Clearance between decks on bunk 38″ without mattresses
• Guardrail approximately 14 inches height
• Total Weight 156 LB

Bunk Bed Shipping

Bunk Beds do not qualify for free shipping and are delivered via freight truck. Please call or click to request a quote in advance.

Bulk Order information

• 150 bunk sets fit in a full trailer load
• 5 sets per pallet stacked upright boxed
• Made in North America
• Manufacturing capacity is 100 bunks per day to fit the needs of institutional orders